Several Kinds of LED Display Installation

  • 2019-11-27

1. The Mosaic: suitable for smaller indoor screen. Due to the small space, in order to do not take up space, according to the screen size on the wall to dig out the area of the same size, the LED display embedded in the wall. Wall for the solid wall. With the method of before the maintenance, the cost is higher.

2. The wall: more suitable for the installation of indoor LED display, smaller (below 10 square meters), wall is solid walls, hollow bricks or simple retaining wall are not suitable for the installation.

3. Hanging: more suitable for the station LED display, LED display at the airport and other places of large signage. Request screen area is lesser. (below 10 square metre) requirements and must have the appropriate installation location, such as beams or columns above, and the screen body in general to add back cover.
4. Pillar type: used for the installation of outdoor advertising LED display, eye shot is open, around the place empty, such as square, parking lot, etc. According to the size of the screen area and can be divided into the installation of single column and double column type.

5. Roof type: mainly applied to outdoor advertising LED display, the installation location is mainly the roof of the building, with the increase of building height to consider windproof level along with the increase.

Let Us Help You Out

Let Us Help You Out

    If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!